shqiptare
euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Focus on news
news information
High Air Pressure DTH Hammer on sales introduce a drill pipe
2023/03/17
When using it. High Air Pressure DTH Hammer on sales tells you that the new drill pipe should be coated with an appropriate amount of lubricating oil on the connecting and rotating parts before the first work, so as to ensure that the threaded thread of the drill pipe will not be damaged by large friction during the tightening process.
High Air Pressure DTH Hammer on sales tells you that when drilling, you must ensure that the center of gravity of the drill pipe and the center of the drill hole is on the same line, that is, to ensure the concentricity of the drill hole and the drill pipe.
High Air Pressure DTH Hammer on sales tells you that if the concentricity has a large deviation, the drill pipe will be subjected to a large bending force when the DTH hammer drill is drilled, and in severe cases, it will cause the drill pipe to break.
After use. High Air Pressure DTH Hammer on sales tells you that after the drilling is completed, the drill pipe should be properly placed, especially the long drill pipe, which should be placed flat on the ground to avoid the center of gravity of the drill pipe being suspended too much and causing the drill pipe to be damaged. bending. At the same time, the threaded threads at both ends of the drill pipe cannot be exposed, and the lock joint must be screwed on to protect the threaded threads from being damaged by external forces.
Through the above introduction and analysis of the High Air Pressure DTH Hammer on sales introduce a drill pipe, hope it helps you.
Related News
2022/06/10
2022/06/10
2025/06/04
2025/06/01
E-mail:
Add: No.4855 Shugang Avenue, Jingqing Town, Luqiao District, Taizhou city, Zhejiang Province
Tel: +86-576-82737372
Copyright @ 2022 Pulanka Rock Tools . All Right Reserved. SEO Powered by www.300.cn
