shqiptare
euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Focus on news
news information
Low price High Air Pressure DTH Hammer manufacturers introduce some features of DTH hammer
2023/03/17
Low Price High Air Pressure DTH Hammer manufacturers tell you what information you need to know when using a pneumatic down-the-hole hammer for a rotary drilling rig. 10bar or 12bar air pressure is output by the air compressor.
Low Price High Air Pressure DTH Hammer manufacturers tell you that the air flow rate depends on the diameter of the DTH hammer, for example, the maximum air flow rate for a 1 m diameter DTH hammer is 80 m/min.
Low Price High Air Pressure DTH Hammer manufacturers tell you that the recommended air volume is 100 m/min; three or four air ducts are concentrated to the confluence device to become the root general telecommunications, and the confluence device is equipped with a water jet cooling system. After the main air duct passes through the lubrication device Send the air volume to the cluster down-the-hole hammer.
Through the above introduction and analysis of Low price High Air Pressure DTH Hammer manufacturers introduce some features of DTH hammer, hope it helps you.
Related News
2022/06/10
2022/06/10
2025/06/04
2025/06/01
E-mail:
Add: No.4855 Shugang Avenue, Jingqing Town, Luqiao District, Taizhou city, Zhejiang Province
Tel: +86-576-82737372
Copyright @ 2022 Pulanka Rock Tools . All Right Reserved. SEO Powered by www.300.cn
